False www. torrent. co. uk 8 Cembre SD- 5P2 The Cembre SD- 5P2 is extremely compact, practical and purposely designed for the drilling of wooden sleepers in complete safety. Weighing only 18kg, it is lightweight, easy to carry around and needs no separate supporting stand. During operation, transmission of vibrations are considerably reduced by an integral shock absorber between the drive shaft and spindle. LD- 1PLD- 2E 110 Cembre LD- 1P & LD- 2E 110 Both the petrol driven LD- 1P and electric driven LD- 2E rail drills from Cembre have been specifically designed for use in railway applications providing consistently accurate work whatever the weather conditions. Compact in size, these drills afford considerable time savings by allowing direct operation in cases which previously have entailed armament removal. Special twist drills can be used for hole diameters from 7 to 22mm on rails up to 45mm in thickness and broach cutters for 13 to 32mm hole diameters on rails up to 50mm thick. Each model is provided with a coolant system consisting of a reservoir and pump which is connected via a quick release coupler arrangement. Both units are lightweight and ideally suited for one- man operation. Specification Engine: 33cc 2- stroke Drilling Range: 7 to 32mm Drilling Thickness: 50mm ( max) Power: 0.88kW Total Weight: 20kg 03- 005 Specification Engine: 110v 50hz single phase Drilling Range: 7 to 32mm Drilling Thickness: 50mm ( max) Power: 1.8kW Total Weight: 18kg 03- 006 CodeDescriptionWeightVibration 03- 005 Cembre LD- 1PRail Drill20.0kg2.5M/ s2 03- 006 Cembre LD- 2ERail Drill18.0kg2.5M/ s2 03- 007 Cembre SD- 9P2Sleeper Drill40.0kg3.7M/ s2 Specification Engine: 48.6cc 2- stroke Bit Diameter: 19mm ( max) Drilling Thickness: 200mm max Power: 1.9hp/ 1.4kW Total Weight: 40kg 03- 007 DRILLING

False 24 HOUR HOTLINE: 0845 769 7168 9 Cembre HTEPE- DET Installation Tool for Rail Web Cable Connection System The Cembre system allows the bush to be installed in all weather and environmental conditions with a simple, easy to operate tool, producing a consistent, quality installation, independent from the skill of the operator. The reduced installation time of this system will result in overall cost savings. The HTEPE- DEThydraulic hand tool comprises of: a: Hydraulic pump tool body b: Hydraulic installation head c: Plastic carrying case d: Two plungers e: Go- No- Go gauge During the installation process, the bush is extruded and the copper material flows into the wall of the hole, compensating for variations in hole size, filling any voids and uneven surfaces. See schematic diagrams above. Specification Pump Body: L: 275mm; W: 130mm Head Length: 106mm Weight: 3kg 03- 008 CodeDescriptionWeight 03- 008 Cembre HTEPE- DET Rail Web Tool3.0kg DRILLING