False 10- 030 10- 017 www. torrent. co. uk 20 Hilti TE905 Ballast Tamping Tool The 110v Hilti TE905 represents a breakthrough in ballast compaction for the permanent way. Independent tests have shown that the TE905 can be operated for up to six and a half times longer than other electric breakers. The TE905 provides higher performance and more comfort for the operator. ? Revolutionary AVRdamping system for reduced risk of vibration white finger ? Less physical stress for the operator increasing performance output ? New symmetrical long spade design ideal for chiselling towards the floor ? Powerful hammering mechanism with robust 1600 watt motor ? Chisel insertion or changes made easy by a hexagon connection end and automatic slide lock with ball- notch retention Atlas Copco Cobra TTTamper/ Breaker The Cobra TT has been specially developed for tamping. An impact of 40 joules combined with hammer speed of 1620 blows/ minute means improved efficiency and drastically reduced ballast pulverisation. Weighing only 25kg the Cobra TT is easy to move around and comes equipped with a new dampening system that virtually eliminates vibration. The 90cc two- stroke petrol driven engine meets the toughest emission limit regulations. Can be supplied with Electronic Warning Systems ( see items 12- 006 & 12- 009) Specification Power Input: 1.6kW Hammer Speed under load: 2200 blows/ min Single Impact Energy: 20J Vibration: 8m/ sec2 Dimensions: 680x110x180mm Breaker Weight: 11.3kg Breach Chiselling Performance: 1300cm3/ min Protection Class II; TV& radio interference suppression Total Weight: 12kg Specification Length: 927mm Depth: 331mm Width ( across handles): 611mm Width ( handles folded): 390mm Power Source: Two- stroke petrol Engine Capacity: 90cc Power Input: 1.2kW Cooling System: Fan cooled Impact Energy: 40J at 1620 blows/ min Hammer Speed: 720 - 1620 blows/ min Total Weight: 25kg CodeDescriptionWeightVibration 10- 008 Hilti TE54 110v10.0kg11.0m/ s2 10- 017 Hilti TE905 110v( c/ w ballast tool) 12.0kg8.0m/ s2 10- 030 Cobra TTW( c/ w ballast tool) 25.0kg2.3M/ s2 WCan be supplied with Electronic Warning System BALLASTTAMPING

False Geismar AP11 Rail Mounted Clip Applicator & Extractor ( Fastclip) The Geismar AP11 is a petrol- driven machine designed for the insertion and extraction of Pandrol Fastclips. The machine is fitted with a T6 head and performs simultaneous extraction or insertion of two fastclips on both sides of the rail. The main advantages of the system are: ? High Output ? Tools can be exchanged within a few minutes ? Work on wooden or concrete sleeper configuration ? All operating controls located on same side of frame, in easy reach of the operator ? Pressure is continuously applied, whatever the operation and without any operator’s action ? Electrical switched return mechanism, increasing output whilst reducing operator fatigue 24 HOUR HOTLINE: 0845 769 7168 clipapplicators& extractors 21 Geismar AP21 Rail Mounted Clip Applicator & Extractor ( EClip) The Geismar AP21 is a hydraulic machine designed for the insertion and extraction of Pandrol clips, either “ PR” or “ e” series, Stedefclips “ DSA” type and other similar clips. The machine performs simultaneous extraction or insertion of two clips on both sides of the rail by pulling or pushing the clip buckles. The main advantages of the system are: ? High Output ? Tools can be exchanged within a few minutes ? Work on wooden or concrete sleeper configuration ? All operating controls located on same side of frame, in easy reach of the operator ? Pressure is continuously applied, whatever the operation and without any operator’s action ? Electrical switched return mechanism, increasing output whilst reducing operator fatigue 11- 007 Specification Output: 1700 clips/ hr Thrust ( max): 31kN Machine: 2250x600x1100mm Weight ( without trolley): 140kg Trolley: 1700x600x330mm Weight ( trolley): 35kg Total Weight: 203kg 11- 009 Specification Engine: Honda- type GX160 Output ( max): 1210 clips/ hr Thrust ( max): 29kN Machine: 2100 x 835 x 935mm Weight ( without trolley): 148kg Weight ( trolley): 34.5kg CodeDescriptionWeightVibration 11- 001 Hydraulic Spike Remover*( Hand held) 14.0kg 11- 004 AC- 1 Rail Mounted Spike Remover123.0kg 11- 005 Hydraulic Pandrol Clip Remover71.0kg15.0M/ s2 11- 006 Electric Pandrol Clip Remover71.0kg15.0M/ s2 11- 007 AP21 Applicator/ Extractor ( EClip) 203.0kg4.5M/ s2 11- 009 AP11 Applicator/ Extractor ( Fastclip) 167.0kg4.5M/ s2 * Requires Hydraulic Power Pack 04- 004 to operate CONSUMABLES CodeDescriptionWeight 21- 001 2- Stroke Oil1.0kg per litre 21- 003 Petrol0.9kg per litre