page 1 page 2 page 3 page 4 page 5 page 6 page 7 page 8 page 9 page 10 page 11 page 12 page 13 page 14 page 15 page 16 page 17 page 18 page 19 page 20 page 21 page 22 page 23 page 24 page 25 page 26 page 27 page 28 page 29 page 30 page 31 page 32 page 33 page 34 page 35 page 36 page 37 page 38 page 39 page 40
|
False Geismar AP11 Rail Mounted Clip Applicator & Extractor ( Fastclip) The Geismar AP11 is a petrol- driven machine designed for the insertion and extraction of Pandrol Fastclips. The machine is fitted with a T6 head and performs simultaneous extraction or insertion of two fastclips on both sides of the rail. The main advantages of the system are: ? High Output ? Tools can be exchanged within a few minutes ? Work on wooden or concrete sleeper configuration ? All operating controls located on same side of frame, in easy reach of the operator ? Pressure is continuously applied, whatever the operation and without any operator’s action ? Electrical switched return mechanism, increasing output whilst reducing operator fatigue 24 HOUR HOTLINE: 0845 769 7168 clipapplicators& extractors 21 Geismar AP21 Rail Mounted Clip Applicator & Extractor ( EClip) The Geismar AP21 is a hydraulic machine designed for the insertion and extraction of Pandrol clips, either “ PR” or “ e” series, Stedefclips “ DSA” type and other similar clips. The machine performs simultaneous extraction or insertion of two clips on both sides of the rail by pulling or pushing the clip buckles. The main advantages of the system are: ? High Output ? Tools can be exchanged within a few minutes ? Work on wooden or concrete sleeper configuration ? All operating controls located on same side of frame, in easy reach of the operator ? Pressure is continuously applied, whatever the operation and without any operator’s action ? Electrical switched return mechanism, increasing output whilst reducing operator fatigue 11- 007 Specification Output: 1700 clips/ hr Thrust ( max): 31kN Machine: 2250x600x1100mm Weight ( without trolley): 140kg Trolley: 1700x600x330mm Weight ( trolley): 35kg Total Weight: 203kg 11- 009 Specification Engine: Honda- type GX160 Output ( max): 1210 clips/ hr Thrust ( max): 29kN Machine: 2100 x 835 x 935mm Weight ( without trolley): 148kg Weight ( trolley): 34.5kg CodeDescriptionWeightVibration 11- 001 Hydraulic Spike Remover*( Hand held) 14.0kg 11- 004 AC- 1 Rail Mounted Spike Remover123.0kg 11- 005 Hydraulic Pandrol Clip Remover71.0kg15.0M/ s2 11- 006 Electric Pandrol Clip Remover71.0kg15.0M/ s2 11- 007 AP21 Applicator/ Extractor ( EClip) 203.0kg4.5M/ s2 11- 009 AP11 Applicator/ Extractor ( Fastclip) 167.0kg4.5M/ s2 * Requires Hydraulic Power Pack 04- 004 to operate CONSUMABLES CodeDescriptionWeight 21- 001 2- Stroke Oil1.0kg per litre 21- 003 Petrol0.9kg per litre False www. torrent. co. uk warning& safetyequipment 22 General Warning & Safety Equipment Our range of warning and safety equipment gives you the ability to block a section of track or put in place a temporary speed restriction, quickly and efficiently. Each piece is designed so that it can be placed on- site in its transportation mode and erected within minutes when the restriction is required. CodeDescriptionWeight 12- 001 Audible Warning Device ( AWD) 13.0kg 12- 002 Marker Board9.5kg 12- 003 EROSWarning Board50.0kg 12- 004 Speed Board2.0kg 12- 005 Temporary Track Magnet40.0kg 12- 006 Gifas Warning System * 10.0kg 12- 009 Factair Electronic Warning System 12- 012 Possession Limit Board ( c/ w base) 15.5kg * For use with Wacker BH 23 and Atlas Copco Cobra TT Ballast Tampers 12- 002 . 12- 003 . 12- 004 12- 001 12- 012 |