False www. torrent. co. uk raildisccutters 4 Partner Rail Cutters The powerhead is fitted with an electronic governor in the ignition system ensuring that the blade does not over- speed or exceed its peripheral speed even as the machine runs out of fuel. The powerhead also incorporates full anti- vibration to all handles thus improving operator comfort and reducing the risk of vibration induced “ white finger”. The fuel tank is vented to a maximum pressure of 4psi to ensure operator safety. The screw clamp attaching the arm to the rail is radiused to prevent damage to the rail face. All Partner rail cutters are available with a rail cutting attachment. The machines are available in either 12 ? ( 300mm) or 14 ? ( 350mm) sizes and are suitable for cutting any type of rail - flat bottomed, bullhead or conductor. All cutters are supplied in heavy duty transport cases. Specification Power Source: 2- stroke petrol Engine Capacity: 119cc Power: 5.8kW ( 7.8hp) Arbor Size: 25.4mm Power Unit Weight: 14.7kg Rail Arm Weight: 5.4kg Transit Case Weight: 8.9kg Total Weight: 30.0kg 01- 002 01- 005 CONSUMABLES CodeDescriptionWeight 21- 001 2- Stroke Oil1.0kg per litre 21- 003 Petrol0.9kg per litre 21- 131 Cutting Oil1.1kg per litre 21- 437 12in Cutting Disc for Metal0.5kg 21- 438 12in Cutting Disc for Stone0.5kg 21- 439 14in Cutting Disc for Rail0.85kg CodeDescriptionWeightVibration 01- 001 12 ? Rail Cutter29.0kgf5.0/ r6.0M/ s2 01- 002 14 ? Rail Cutter30.0kgf5.0/ r6.0M/ s2 01- 005 14 ? Cut Off Saw10.4kgf6.0/ r8.0M/ s2 01- 007 14 ? Rail Cutter ( c/ w isolation switch) 29.0kgf5.0/ r6.0M/ s2

False Specification Socket Rotation Speeds: 70/ 195rpm; 70/ 255rpm Dimensions: 2000x620x880mm Weight: Trolley: 35kg Without Trolley: 108- 141kg ( dependent on type of engine) Torque Controller: 28kg Total Weight: 176kg 24 HOUR HOTLINE: 0845 769 7168 impact& torquewrenches 5 Specification Power Source: 2- stroke petrol Engine Capacity: 56cc Length: 590mm Height: 270mm Width: 460mm Torque: 350- 600ft/ lb ( adjustable) 1 ? standard square drive Total Weight: 20.0kg CodeDescriptionWeightVibration 02- 001 Impact Wrench ( 2- stroke) 20.0kg13.1M/ s2 02- 002 TB2 Impact Wrench ( rail mounted) 176.0kg6.0M/ s2 02- 003 Impact Wrench ( hydraulic) 12.0kg33.4M/ s2 02- 004 Torque Wrench ( hand held 650ft/ lb) 12.0kg 02- 005 Impact Wrench ( electric 1/ 2 ? drive) 11.0kg 02- 009 Torque Wrench ( 3/ 4 ? drive) 12.0kg Maxim Master 56 Impact Wrench Alightweight machine for tightening and loosening bolts or nuts, driving in and removing chair screws and when using an adaptor chuck, for augering. Uses standard sockets and auger bits. Powered by a 56cc air cooled engine, the machine is equipped with full anti- vibration handles, electronic ignition, centrifugal clutch and a diaphragm carburettor. There is also a foot rest for added stability when pull starting and an anti- scuff plate fitted to the fuel tank base. Geismar TB2 Impact Wrench The Geismar TB2 Rail Mounted Impact Wrench is a machine specifically designed for heavy duty coachscrew and fishbolt fastening. Quick switching from coachscrew to fishbolts position and vice versa can be achieved in as little as 15 seconds. The TB2 also features two socket rotation speeds, an adjustable torque limiting device with graduated dial for direct reading of the tightening torque. The TB2 is powered by a pull start petrol or diesel engine fitted with a five litre fuel tank. 02- 00102- 002 02- 001 CONSUMABLES CodeDescriptionWeight 21- 448 Impact Wrench Pin0.1kg 21- 449 Impact Wrench Ring0.1kg Full range of sockets available on request