False Specification Socket Rotation Speeds: 70/ 195rpm; 70/ 255rpm Dimensions: 2000x620x880mm Weight: Trolley: 35kg Without Trolley: 108- 141kg ( dependent on type of engine) Torque Controller: 28kg Total Weight: 176kg 24 HOUR HOTLINE: 0845 769 7168 impact& torquewrenches 5 Specification Power Source: 2- stroke petrol Engine Capacity: 56cc Length: 590mm Height: 270mm Width: 460mm Torque: 350- 600ft/ lb ( adjustable) 1 ? standard square drive Total Weight: 20.0kg CodeDescriptionWeightVibration 02- 001 Impact Wrench ( 2- stroke) 20.0kg13.1M/ s2 02- 002 TB2 Impact Wrench ( rail mounted) 176.0kg6.0M/ s2 02- 003 Impact Wrench ( hydraulic) 12.0kg33.4M/ s2 02- 004 Torque Wrench ( hand held 650ft/ lb) 12.0kg 02- 005 Impact Wrench ( electric 1/ 2 ? drive) 11.0kg 02- 009 Torque Wrench ( 3/ 4 ? drive) 12.0kg Maxim Master 56 Impact Wrench Alightweight machine for tightening and loosening bolts or nuts, driving in and removing chair screws and when using an adaptor chuck, for augering. Uses standard sockets and auger bits. Powered by a 56cc air cooled engine, the machine is equipped with full anti- vibration handles, electronic ignition, centrifugal clutch and a diaphragm carburettor. There is also a foot rest for added stability when pull starting and an anti- scuff plate fitted to the fuel tank base. Geismar TB2 Impact Wrench The Geismar TB2 Rail Mounted Impact Wrench is a machine specifically designed for heavy duty coachscrew and fishbolt fastening. Quick switching from coachscrew to fishbolts position and vice versa can be achieved in as little as 15 seconds. The TB2 also features two socket rotation speeds, an adjustable torque limiting device with graduated dial for direct reading of the tightening torque. The TB2 is powered by a pull start petrol or diesel engine fitted with a five litre fuel tank. 02- 00102- 002 02- 001 CONSUMABLES CodeDescriptionWeight 21- 448 Impact Wrench Pin0.1kg 21- 449 Impact Wrench Ring0.1kg Full range of sockets available on request

False 03- 002 Specification Length: 310mm Width: 280mm Height: 990mm Weight: 13kg Power Supply: 110v Total Weight: 16kg Accessories 2 x 7.2mm Drill Bits 1 Chuck Key www. torrent. co. uk raildrillingequipment 6 Geismar PT8 Sleeper Drilling Machine The Geismar PT8 is essentially composed of an engine and a drilling head, supported on a four- wheel trolley. A large diameter tube connects the engine to the drilling head and serves as a frame and shield for the transmission shaft. Four arms are fitted for operation and handling of the machine. The four- wheel trolley makes it easy for one man to move it from one rail to another. The machine has a high drilling capacity - a sleeper can be drilled in two seconds with an auger of standard size ( 13- 18mm). The machine is also usually supplied with an auger holding chuck and a drilling guide of the desired type. The maximum drilling capacity is 33mm. The guide holder is extremely rigid and can be adjusted to suit the length of the various augers used. Its narrow design feature allows precise drilling through any type of rail attachment. Specification Drilling: vertical or at an angle of 1 in 20 Spindle Speed ( max): 1400rpm Length of Auger: all standard lengths up to 305mm ( 12 ? ) Drilling Capacity ( max): 33mm ( 15/ 16 ? ) dia. Drilling Speed: 2 seconds/ hole Petrol Engine: air cooled 4- stroke Power Rating: 2.94kW ( 4hp) @ 2500rpm Petrol Consumption: 1.3L/ hr ( 0.29gal/ hr) Weight: Trolley: 35kg ( 77lb) Without Trolley: 85kg ( 187lb) Dimensions: 2150 x 620 x 1250mm ( 7 ´ 05/ 8 ? x 2 ´ 03/ 8 ? x 4 ´ 01/ 4 ? ) Total Weight: 124kg 03- 001 TM4000 OBHRail Bond Hole Drill A unique over rail bond hole drilling machine that simultaneously drills two 7.2mm holes at 76mm centres and 57mm from the rail bottom. The twin Hitachi 720W drills are fitted with right angled spindles to allow drilling in confined areas such as complex points and crossings, wing rails and check rails. There are many safety and easy to use features built into the machine such as drilling is done whilst the operator is standing, the drills will only run if both the operator’s hands remain on the handle and all electrics are double insulated to allow for wet weather use. A spring assisted mechanism fully withdraws the drill bits on release of the handle. CodeDescriptionWeightVibration 03- 001 Geismar PT8124.0kg4.7M/ s2 03- 002 TM4000 OBH16.0kg