False 24 HOUR HOTLINE: 0845 769 7168 7 Rotamag TM32 The universal track drilling system quickly clamps on to any standard rail section and accurately drills holes for bonds, fishplates and stretcher bars. The high frequency version of this machine has been approved for use on Network Rail and London Underground networks. The rail indexing plate and vertical adjustment using a positive spring locator, ensures that every hole is correctly placed at all times, regardless of diameter and hole pitch specification. Specification Dimensions: 814 x 305 x 255mm Power: 110v ac High Freq. Version: 200/ 300Hz Total Weight: 38kg 03- 003 Rotamag PM38 Powered by a 40cc petrol motor through an automatic clutch and gearbox, the fully independent PM38 makes on- line track drilling, a one-man operation. Compact, lightweight and portable with positive location of accurate holes up to 38mm diameter on all types of rail section. Operation could not be simpler. The lightweight unit can be clamped over the rail within 5 seconds. A positive location is achieved through the rail indexing plate and vertical adjustment facility. This ensures accurate hole positioning up to the maximum diameter regardless of hole pitch. Specification to suit any type of fishplate. Specification Length: 750mm Width: 500mm Height: 255mm Power: 2- stroke petrol Total Weight: 45.5kg 03- 004 CodeDescriptionWeight 03- 003 Rotamag TM3238.0kg 03- 004 Rotamag PM3845.5kg DRILLING CONSUMABLES CodeDescriptionWeight 21- 040 Auger Bit 9mm Hex x 230mm0.15kg 21- 401 10mm ( 3/ 8in) Soft Wood Drill Bit0.15kg 21- 402 13mm ( 1/ 2in) Soft Wood Drill Bit0.15kg 21- 403 16mm ( 5/ 8in) Soft Wood Drill Bit0.15kg 21- 404 18mm ( 11/ 16in) Soft Wood Drill Bit0.15kg 21- 405 19mm ( 3/ 4in) Soft Wood Drill Bit0.15kg 21- 406 22mm ( 7/ 8in) Soft Wood Drill Bit0.15kg 21- 407 10mm ( 3/ 8in) Hard Wood Drill Bit0.15kg 21- 408 13mm ( 1/ 2in) Hard Wood Drill Bit0.15kg 21- 409 16mm ( 5/ 8in) Hard Wood Drill Bit0.15kg 21- 411 18mm ( 11/ 16in) Hard Wood Drill Bit0.15kg 21- 412 19mm ( 3/ 4in) Hard Wood Drill Bit0.15kg 21- 413 22mm ( 7/ 8in) Hard Wood Drill Bit0.15kg 21- 414 7mm ( 9/ 32in) Bond Hole Drill Bit0.15kg 21- 415 12mm ( 1/ 2in) PT8 Drill Bit0.2kg 21- 416 14mm ( 17/ 32in) PT8 Drill Bit0.2kg 21- 417 16mm ( 5/ 8in) PT8 Drill Bit0.2kg 21- 418 17.5mm ( 11/ 16in) PT8 Drill Bit0.3kg 21- 419 18mm ( 11/ 16in) PT8 Drill Bit0.3kg 21- 421 21mm ( 13/ 16in) Rail Drill Cutter ( RMR 25mm) 21- 422 22mm ( 7/ 8in) Rail Drill Cutter ( RMR 25mm) 21- 428 28mm ( 11/ 32in) Rail Drill Cutter ( RMR 25mm) 21- 429 29mm ( 15/ 32in) Rail Drill Cutter ( RMR 25mm) 21- 430 30mm ( 13/ 16in) Rail Drill Cutter ( RMR 25mm) 21- 431 31mm ( 17/ 32in) Rail Drill Cutter ( RMR 25mm) 21- 432 32mm ( 11/ 4in) Rail Drill Cutter ( RMR 25mm) 21- 434 Pilot Pin 21- 435 Manganese Cutters ( available on request) CONSUMABLES CodeDescriptionWeight 21- 001 2- Stroke Oil1.0kg per litre 21- 003 Petrol0.9kg per litre

False www. torrent. co. uk 8 Cembre SD- 5P2 The Cembre SD- 5P2 is extremely compact, practical and purposely designed for the drilling of wooden sleepers in complete safety. Weighing only 18kg, it is lightweight, easy to carry around and needs no separate supporting stand. During operation, transmission of vibrations are considerably reduced by an integral shock absorber between the drive shaft and spindle. LD- 1PLD- 2E 110 Cembre LD- 1P & LD- 2E 110 Both the petrol driven LD- 1P and electric driven LD- 2E rail drills from Cembre have been specifically designed for use in railway applications providing consistently accurate work whatever the weather conditions. Compact in size, these drills afford considerable time savings by allowing direct operation in cases which previously have entailed armament removal. Special twist drills can be used for hole diameters from 7 to 22mm on rails up to 45mm in thickness and broach cutters for 13 to 32mm hole diameters on rails up to 50mm thick. Each model is provided with a coolant system consisting of a reservoir and pump which is connected via a quick release coupler arrangement. Both units are lightweight and ideally suited for one- man operation. Specification Engine: 33cc 2- stroke Drilling Range: 7 to 32mm Drilling Thickness: 50mm ( max) Power: 0.88kW Total Weight: 20kg 03- 005 Specification Engine: 110v 50hz single phase Drilling Range: 7 to 32mm Drilling Thickness: 50mm ( max) Power: 1.8kW Total Weight: 18kg 03- 006 CodeDescriptionWeightVibration 03- 005 Cembre LD- 1PRail Drill20.0kg2.5M/ s2 03- 006 Cembre LD- 2ERail Drill18.0kg2.5M/ s2 03- 007 Cembre SD- 9P2Sleeper Drill40.0kg3.7M/ s2 Specification Engine: 48.6cc 2- stroke Bit Diameter: 19mm ( max) Drilling Thickness: 200mm max Power: 1.9hp/ 1.4kW Total Weight: 40kg 03- 007 DRILLING